Ocean LED Weld In Puck Light Underwater Lights for boats

Home | Products | Puck Light

Puck Light

The OceanLED Puck Light fixture is designed to be used in Steel, Aluminium or Fibreglass hulls.

Cofferdams - We recommend tube for the Cofferdam walls to be sourced by the shipyard during installation to save on freight costs. OceanLED then supplies a Welding Back Plate which affixes to the tube creating the final Cofferdam for the light to be mounted.

Alternatively full cofferdams can be supplied.

For fibreglass hulls the follows along the same principal design where a molded pocket in the Fiberglass hull allows water to flow in and around the LED light enabling sufficient cooling.

If a General Arrangement (GA) can be supplied, our design department can assist in cofferdam design for maximum cost efficiency.

Full Cofferdams are available from us on request.

The Puck Light is available in the 3010 series only with the Standard Super White LEDs or the New Super Blue LEDs, in both the 50 and 140 degree lens options, offering solutions for every vessel up to the largest Superyacht.

With the following information we can give you a quotation for your project.

1. Total Number of lights required

2. Lens Options for each fixture

3. Hull Material - Steel / Aluminium

4. Approx. distance from light to electronic driver equipment

5. Supply voltage

Approved by Lloyds register, RINA, ABS, NMMA Ignition Protection.

We can assist in the design placement of the lights to achieve the best effect, be it a soft halo around the hull or a jet effect out from the transom and hull sides. Contact us for further information.

» Send this product to a friend

Related Products:

Junction Box

Extension Cables

Driver Cabinet

	3010 Puck Light Specification Sheet
	3010 Puck Light PDF Overview
	2010 Puck Light PDF Overview
	3010 Puck Light DXF Outline for Shipyard placement purposes only
	Type Approval Document
	ABS PDA Approval
	RINA Certification
	USGC Ignition Protection Documents
	Puck Light 3D eDrawing Overview