Home | Light Load Calculator

Light series:
Number of lights per cable run:
System voltage:
Cable run in feet (one way):

Allowable Voltage Drop:

Wire Gauge	Voltage Drop	Good?
20
18
16
14
12
10
8
6
4
2
1
0

This is a simple guide to assist with installation. It is not meant to replace the need for a qualified professional to install your lights.

1. Select the type of light you have purchased.
2. Select how many light are on the system
3. Select the supply voltage, either 12 or 24
4. Enter in how long the cable run, one way, from the battery to the lights, in feet.

Then calculate.
The table will then show what gauge of cable is correct to use for your installation.

Losses in cable and connections have NOT been taken into consideration because there are too many variables.

If you are unsure please check with your dealer or call your local OceanLED office for further assistance.